dahl 1/2″ Female Solder or MIP x Male Hose, Angle, Red & Blue

dahl is known to be the market leader in quality. This is evident in the weight of their products. They are all backed by a lifetime warranty and are manufactured in Canada using only North American materials. Dahl pioneered the mini-ball™ valve and continue to evolve with the times. Specifications Material Lead-Free Brass Pattern Angle Finish Rough Brass Inlet Pipe Type Copper Pipe or Threaded NPT Inlet Size 1/2 Copper or Male Iron Pipe Thread Outlet Size 3/4 Male Garden Hose Technical Information 621-01-04-PK2 Submittal Sheet Installation Instructions Instructions for 621-01-04-PK2 Turn off water supply. Install product. Turn on water supply, check for leaks. dahl assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents. NPT THREAD: Clean pipe threads and cover them with pipe dope or PTFE tape. Tighten firmly while gripping hex on end of valve. DO NOT OVER-TIGHTEN. FEMALE SOLDER: Do not dismantle valve – solder in open position. Clean pipe and valve socket with emery cloth, & apply flux to both. Pipe must be square and bottomed in socket. DO NOT re-position valve after soldering. Clean with water and dry. Let cool before operating. HOSE: Tighten firmly. DO NOT OVER-TIGHTEN.