Saniflo 022 Saniswift Pro 1/3 HP Residential or Commercial Heavy-Duty Gray Water Drain Pump

Saniflo 022 Saniswift Pro 1/3 HP Residential or Commercial Heavy-Duty Gray Water Drain Pump is an easy laundry room solution. Perfect use for Laundry/Sink/Shower – HDPE Easy Access – Low inlets. The IAPMO listed Saniswift Pro drain pump is used to pump gray water away from a variety of both residential and commercial applications. The system is able to discharge the waste up to 14 feet vertical and/or 140 feet horizontal. This model is powerful and economical with a compact design and one 1.5″ top inlet and 2″ low inlets which makes it perfect for installations anywhere you can imagine. Features Easy access to major components while installed ↑ 14 Ft ↑ and/or ← 140 Ft → Low inlets for easy installation CSA & IAPMO listed for nationwide compliance Powerful, economical and compact design with 2″ low inlets Specifications Part number 022 Max. horizontal discharge 14 ft Max. vertical discharge 140 ft Voltage 120 V Frequency 60 Hz Amperage 4.5 Amps (Max) Motor 0.3 HP oil-filled thermally protected motor Capacitor rating 30 microfarad Operating temperature 140°F Power cord length 48 inches Noise level (measured at 3 ft.) ≤ 44 dBA (Lp) Discharge pipe diameter 1” – 1–1/2” Discharge rate at 15 ft @14 Ft : 18 GPM Discharge rate at 3 ft 24 GPM Shut-off head 25 ft Normal running time 3-5 seconds (Short bursts) Capacity 2.9 gallons / 11 liters Inlets diameters 2” (sides) Ventilation diameter 1-1/2″ vent (top) Type of activation Pressure switch/ circuit board Shower/bath base height 6″ min Weight 16 lbs / 7.25 kg Certifying agencies CSA (IPC, NSPC), IAPMO (UPC) Downloads and Brochure Saniflo 022 Saniswiftpro